Aqua Celsius Inc. also offers special spa covers to protect your spa from the weather and save on heating and maintenance costs. These spa covers have been specially designed to stand up to the extreme cold of Canadian winters as well as the weight of snow. They are solid and hard-wearing and ideal as replacement covers for your spa.
*Made-to-measure covers start at 295$ + tax with free delivery.
*Feel free to get in touch if you are not sure of the measurements or require further information. We have most major spa manufacturer standard sizes in stock.
TOP QUALITY MARINE VINYL
The 25 ounce thickness vinyl is available in a range of 19 colours and is hard-wearing, weather/tear proof and resistant to the ravages of the winter. The material has UV and mould protection as well as being treated against bacteria.
WIDENED FITTED SKIRT
The skirt is designed to adhere to the heat preventing evaporation and protecting the spa's acrylic edging. Standard 2 inch width which can be extended.
Layers of polystyrene reinforced with a 20 calibre galvanised "C" support to prevent the cover from collapsing under the weight of the snow.
ULTRA-HARD-WEARING INSIDE COATING
The inner lining of the cover is designed to resist chemical products and protect the polystyrene from damage and wear.
Double stitched reinforced four-ply vinyl straps for extra resistance and attachment stability. They are attached by a plastic buckle which can be locked with a key for extra safety and compliance to current safety standards.
Comfortable handles along the edge of the cover for easy lifting and handling. Located strategically to avoid tears.
HIGH DENSITY RAISED POLYSTYRENE CENTRAL LAYER
Designed to ensure effective water run-off and provide protection against the weather. It also insulates the cover and maintains the heat of the spa.
ULTRA THICK STEAM BARRIER LINING
Chemical resistant plastic lining in 2mm polyethylene, fitted and vacuum sealed to the polystyrene. This prevents water infiltration and any build-up of moisture inside the cover.
The centre of the cover has a reinforced rubber strip and 2 insulating pads at the ends to maintain the heat inside the spa and reduce evaporation loss.
The cover is made from weather proof woven fabric and the stitching is precise ensuring that the cover is hard-wearing and elegant.
Inside the cover there are hard-wearing holes to evacuate the build-up of water from evaporation.
PROFESSIONAL QUALITY NYLON ZIP FASTENER
Rust and corrosion proof zip fastener for easy access to the central polystyrene layer.
Each element, stitch and seal is subjected to rigorous quality control inspections.
ASTM F-1346 STANDARD COMPLIANCE
All of the covers comply with ASTM manual safety standards.
Our experienced designers manufacture made-to-measure covers in full compliance to your size and shape specifications. The covers are made to the highest precision, no more than 0.5po error margins are tolerated. The covers can be used on modern or old spa models.
These covers will last for years provided they are maintained regularly. Each cover comes with maintenance instructions to ensure its long life. The colours shown represent a reasonable approximation of the actual colours of the vinyl but may differ depending on the lighting conditions (natural or artificial). The colour may also fade after long exposure to UV rays.
ENVIRONMENTALLY FRIENDLY PRODUCT
The polystyrene used is CFC free. The polystyrene is manufactured using water vapour rather than ozone. This helps to protect the planet's ozone layer.
Select desired models
Conicality : 3"x2"
Density : 1,5 lbs
*Entry-level model for infrequent use
Conicality : 4"x3"
Density : 1.5 lbs
Standard quality model
Conicality : 5"x4"
Density : 1.5 lbs
Wise choice for winter and frequent user
Best quality price report
4 seasons (It resists the big snowflakes)
Conicality : 6"x4"
Density : 1,5 lbs
The most robust choice for users during the winter
* The best built and most solid cover of the industry